Use Arduino GSM/GPRS shield to send data to from my web service to arduino and display it on Dot matrix Display -

i want ask how control dot matrix display (dmd) via web service created using gprs shield v2.0 , arduino uno r3,,,

example: filled out information on domain (mydomain.com/set?string = hello word) , appear in dmd

than possible if data twitter too?? can receive data 2 source, there mydomain.com , twitter.com

i have:

• gprs shield v2.0 bought seeedstudio.com
• using arduino uno r3
• dmd 16x32 bought freetronics

hope works :)

#include <softwareserial.h> softwareserial gprsserial(7, 8);  void setup() {   gprsserial.begin(19200);   serial.begin(19200);    serial.println("config sim900...");   delay(2000);   serial.println("done!...");   gprsserial.flush();   serial.flush();    // attach or detach gprs service    gprsserial.println("at+cgatt?");   delay(100);   toserial();     // bearer settings   gprsserial.println("at+sapbr=3,1,\"contype\",\"gprs\"");   delay(2000);   toserial();    // bearer settings   gprsserial.println("at+sapbr=3,1,\"apn\",\"epc.tmobile.com\"");   delay(2000);   toserial();    // bearer settings   gprsserial.println("at+sapbr=1,1");   delay(2000);   toserial(); }   void loop() {    // initialize http service    gprsserial.println("at+httpinit");    delay(2000);     toserial();     // set http param value    gprsserial.println("at+httppara=\"url\",\"http://your.domain.com/rest/receivesensordata?sensorval1=blah&sensorval2=blah\"");    delay(2000);    toserial();     // set http action type 0 = get, 1 = post, 2 = head    gprsserial.println("at+httpaction=0");    delay(6000);    toserial();     // read server response    gprsserial.println("at+httpread");     delay(1000);    toserial();     gprsserial.println("");    gprsserial.println("at+httpterm");    toserial();    delay(300);     gprsserial.println("");    delay(10000); }  void toserial() {   while(gprsserial.available()!=0)   {     serial.write(gprsserial.read());   } 

}